Weaving is one of the surface forming techniques in textile. Weaving into fabrics formed by the connection of two thread systems at right angles according to certain rules. It called.
What are impacted teeth?
When one or more teeth fails to grow in the correct position and is therefore held below the normal gum line, it is called an impaction. This can be complete, such as completely unerrupted (buried) third molars (wisdom teeth) or partial when just part of the tooth is visible in the mouth.
Why are impactions important?
For best function and appearance the teeth should grow in a healthy alignment. When one or more teeth is impacted, this can affect the function of that tooth but also the function and appearance of other teeth.
Whether all impactions should be treated is still controversial and your dentist and oral and maxillofacial team can explain the advantages and disadvantages or treatment for you, which is usually surgical.
In weaving, the warp threads are parallel to each other in a certain number and side by side. Passing the weft thread through the warp layer that needs to move in the direction of the weaving and incorporating it into the fabric are the basic operations that are repeated continuously. Each of the different connections made by the warp and weft threads form a weaving weave. When these connections were realized in line with an order, weaving weaves emerged.
Threads that run parallel to the edge along the length of the woven fabric warp It called.
What are impacted teeth?
When one or more teeth fails to grow in the correct position and is therefore held below the normal gum line, it is called an impaction. This can be complete, such as completely unerrupted (buried) third molars (wisdom teeth) or partial when just part of the tooth is visible in the mouth.
Why are impactions important?
For best function and appearance the teeth should grow in a healthy alignment. When one or more teeth is impacted, this can affect the function of that tooth but also the function and appearance of other teeth.
Whether all impactions should be treated is still controversial and your dentist and oral and maxillofacial team can explain the advantages and disadvantages or treatment for you, which is usually surgical.
In woven fabric, there are threads that pass from one edge of the fabric to the other in the transverse direction between the warp threads. scarf It called.
What are impacted teeth?
When one or more teeth fails to grow in the correct position and is therefore held below the normal gum line, it is called an impaction. This can be complete, such as completely unerrupted (buried) third molars (wisdom teeth) or partial when just part of the tooth is visible in the mouth.
Why are impactions important?
For best function and appearance the teeth should grow in a healthy alignment. When one or more teeth is impacted, this can affect the function of that tooth but also the function and appearance of other teeth.
Whether all impactions should be treated is still controversial and your dentist and oral and maxillofacial team can explain the advantages and disadvantages or treatment for you, which is usually surgical.
Weft threads are active in the realization of the weaving process. The smallest unit of weaving that repeats in the same way in the transverse (weft) and longitudinal (warp) directions. knitting report is called. Each knitting pattern that makes up the weaving consists of a certain number of warps and wefts.
On the checkered paper showing the weft and warp connections that make up the fabric. pattern paper is called. On the pattern paper, each column represents a warp thread and each row represents a weft thread. On checkered pattern paper warps left to right, scarves from below upwards are numbered. Pattern paper is used in various scales.
Each square on the pattern paper represents the intersection point of a warp thread and a weft thread. At this point, the warp and weft thread have two positions. Somebody; warp on top, weft below; the other is the position where the warp is at the bottom and the weft is at the top.
Empty square:
The points where the weft thread is on the warp thread on the woven fabric are called blank squares on the pattern paper. This intersection point is left blank on the pattern paper. Each blank dot on the pattern paper indicates that the weft thread is on the warp thread.
Full square:
The points where the warp thread is on the top and the weft thread is on the bottom are called the filled square on the pattern paper. This intersection point is filled in the pattern paper. Each solid dot on the pattern paper shows that the warp thread is on the weft thread.
Main braids:
It is the weaves that form the basis of all weaving weaves.
These Ones;
1-Rainbow Knitting
The simplest weaving weave is the plain weave. It is the weave formed by the weft yarn passing one under and one over the warp yarns along the width of the fabric, and the second weft yarn making a reverse movement. The connection of warp and weft threads in plain weave is similar to wicker or basket weave.
It is the form of knitting in which odd-numbered warp threads connect with odd-numbered weft threads and even-numbered warp threads connect with even-numbered weft threads. The plain, which provides the most frequent intersection and interlocking, allows the tissues to be formed very thin and solid.
It is the only weave in which the warp and weft threads do not float (a thread passing over or under more than one thread perpendicular to it). Ragfoot knit is the smallest report woven weave. The knitting pattern has two warp and two weft threads. Each port contacts other ports on all four corners. It is the most durable form of weaving due to the frequent weft and warp connections. The front and back sides of the plain knit fabric are the same. If no pattern creation process is applied to the fabric, the plain weave has no pattern effect.
Since it is the simplest and most durable weaving weave, it is suitable for all kinds of fabric weaving, ie woven fabrics made with cotton, wool, silk and synthetic yarns. It has a wide range of uses such as dress, shirting, lining, pajamas and canvas fabrics, raincoats, kitchen sets, bedding, cheesecloths, draperies, sofa covers.
2-Twill Weave
It is one of the basic weaving weaves that creates diagonal (inclined) paths on the fabric surface. It forms the second of the main braids.
The smallest twill weave pattern consists of three warps and three wefts. The number of warps and wefts is equal in twill weave patterns. The twill diagonal rises from left to right in right-handed (Z) twill weaves, and from right to left in left-handed (S) twill weaves. Both sides of the twill weave fabric are different from each other. It is twill diagonal on the front side of the fabric, left-handed, and right-handed on the reverse. Cloth foot is more suitable for increasing yarn density than knitting. Therefore, it is possible to weave heavier, thicker and durable fabrics compared to plain weave. Being heavy prevents it from crumpling easily. Twill knit fabrics are more flexible and draped than plain knit fabrics. Twill knit fabrics create a suitable basis for the raising process. Woven fabrics produced with twill weave are generally used for weaving fabrics for men's and women's clothing, denim (Blue Jean), blankets and shirting fabrics.
3-Satin Weave
Satin weaves are one of the basic weaving weaves in which the attachment points are placed dispersedly so that they never come into contact with each other.
The smallest satin weave is the 5-ply satin. This knitting pattern consists of 5 warps and 5 wefts. Satin weave fabrics are shiny, smooth, soft and draping fabrics as they do not form diagonal paths like twill weaves and create long jumps. In satin weaves, the connection points do not come into contact with each other in the report. For this reason, yarn floats are seen in the fabric woven with satin weave. This structure prevents the fabric from being strong. Due to these long thread floats, outward thread pulls and thread slippage may occur in the fabric during use. The front and back sides of the fabrics woven with satin weave are different from each other. One side of the fabric is glossy and the other side is matte. Generally, warp threads are dominant on the front of the fabric and weft threads are dominant on the back. The number of warps and wefts in the satin weave pattern is always equal. Mostly 5 and 8 satin weaves are used. Larger patterned satin weaves are not preferred because of the problems that yarn floats will cause during use. Clothes, table and bedspread fabrics; Warp satin weave is generally used for weaving quilt covers, sunshades, underwear, nightgowns, pajamas, linings and upholstery fabrics. Weft satin weave, which is not widely used, is used in pile fabrics such as blankets.
lessontextile 
