Shaded satin weave in weft direction
• Shaded satin weave in weft direction

SHADED SATIN KNIT IN THE WEFT DIRECTION

Shaded satin weave in the weft direction;

is obtained in two ways.

Half shaded satin weave, for example, is obtained by transforming the given weft satin weave pattern into warp satin.

On the other hand, full shade satin weave is formed by continuing the weft satin weave pattern until the warp satin weave pattern turns into a weft satin weave pattern again.

A-Weft direction half shaded satin weave

Calculation of warp and weft wire count of half shaded satin weave in weft direction from 3 hop 5' weft satin

Number of report warp wires : 5

Number of report weft wire: (5 x 4)=20

Half shaded satin weave The number of weft wires to be used for half shaded satin weave in the weft direction is determined as the value obtained as a result of multiplying the given satin weave report wire number and one less report wire number. The warp wire count is taken as the given satin weave report wire count.

B-Weft direction Full shade satin weave

The number of weft wires to be used for the full shade satin weave in the weft direction is determined as the value obtained by subtracting two reports from the twice the value obtained as a result of the product of the given satin weave report wire number and one less report wire number. The warp wire count is taken as the given satin weave report wire count.

Calculation of warp and weft wire count of full shade satin weave in Weft direction from 3 hop 5' weft satin

Number of report warp wires : 5

Number of report weft wire: {(5 x 4) x 2} – (2 x 5)=30

Posted by %PM, 14% 697% 2018 18%:%May in Pattern Read 1461 times