Double-layered knits with additional weft connection are double-layered knits in which the connection between two fabrics is provided with a special weft yarn. all the connecting wefts are on the upper warps are available. In the drawing of double-layered knits, after the upper and lower knits are placed, the connection wefts and the upper warps are intersected. remove sign ( / )is drawn. Lifting marks when drawing dobby plan full square As the drawing of double-layered fabric knits with additional weft connection consists of two different warp groups, it will be appropriate to draw in groups. Since the interaction of the yarns of the upper fabric and the yarns of the lower fabric and the connecting weft will be examined, all three yarn groups should be included. For this reason, the first three yarns are generally preferred.

Example 1:

upper mesh

2

D ----------------- Z

2

lower braid

2

D ----------------- Z

2

so that the ratio is 2/1 double-layered fabric weave with additional weft connection, drawing of plot and dobby plans.

1-Report area is determined. Since the ratio is 2/1, the warp threads are arranged as one upper-one lower, weft threads one upper-one lower, one upper-one lower and one connection.

Here;

It should not be forgotten that there are 4 warps and 4 wefts in the upper knitting pattern, and 4 warps and 4 wefts in the lower knitting pattern. While determining the report area, the warp, weft ratio and connection weft are taken into account.

2- Squares located at the intersection points of the upper warps and upper wefts.

2

D ----------------- Z

2

The upper fabric weave is placed.

3- To the squares at the intersection points of the upper warps and upper wefts.

2

D ----------------- Z

2

The bottom fabric weave is placed.

4-A lifting sign ( / ) is drawn on the squares located at the intersection points of the upper warps and lower wefts.

Here;

It should not be forgotten that in double-layer fabric structures, all the upper warps must be on the lower wefts.

5- A lifting sign ( / ) is drawn on the squares located at the intersection points of the upper warps and the connecting wefts.

Here;

It should not be forgotten that in double-layered knits with additional weft connections, all connection wefts must be above the upper warps.

6- The connection points that the connecting weft will make with the lower warps are determined. The squares located at the specified connection points are filled.

Here;

When choosing the connection points, care should be taken to ensure that the surrounding is warp-dominated (full square).

7- The connection points that the connecting weft will make with the upper warps are determined. Removal marks on the specified ports are canceled.

Here;

When choosing these connection points, care must be taken to ensure that the surrounding area is weft dominated (empty square).

8- The points where the connecting wefts connect with the upper warps are shown as an empty square on the knit.

9- Drawing and dobby plan

Posted by %PM, 13% 631% 2018 17%:%Apr in Pattern